Compare

FEATURES

POWER FEED TABLE
The Electric-Controlled Power Table supplies 80 Kg-cm power to the object to benefit a 
continuous straight cut for productivity consideration. Cutting length can be adjusted as
desired, (it does not have to be always cut-off) function can be switched to automatically
stop after finish cutting so that the operator can be free for another task.
 TRANSMISSION
VBS-1408 and VBS-1408E have a transmission as below. It provides variable speed
through a speed reducer to cut most of steel object.
VBS-1610 and VBS1610E are equipped with variable pulley combined with HI-LOW
gearbox to bring the speed up to 1200 M/min. With the high speed, most of material
including non-metals can be done.

STANDARD EQUIPMENT
RIP FENCE
CHIP BLOWER
BLADE WELDER
BLADE GRINDER
BLADE SHEARER
110 VOLT CIRCUITS
110 VOLT WORK LIGHT
3 PHASE POWER SUPPLY
OVER LOAD MEGNETIC STARTER
UPPER WHEEL TILT ASJUSTER
KEY SWITCH
EMERGENCY STOP SWITCH
POST ELEVATING HANDWHEEL
DIGITAL RENDOUT TACHOMETER
BLADE TENSION INDICATOR

SPECIFICATIONS

MODEL VBS-1408 VBS-1610 VBS-2012
…MAX. THROAT CAPACITY 356 mm ; 14 inch 396 mm ; 16 inch 508 mm ; 20 inch
…MAX. WORK HEIGHT 205 mm ; 8 inch 255 mm ; 10 inch 305 mm ; 12 inch
…WHEEL DIAMETER 368 mm ; 14 1/2 inch 408 mm ; 16 inch 515 mm ; 20 1/2 inch
…BLADE SPEED 60 Hz 25-100 M/min
82-330 F/min
Low 25-100,
HI 300-1200 M/min
Low 82-330,
HI 985-3950 F/min
Low 20-180,
HI 120-1000 M/min
Low 65-585,
HI 390-3280 F/min
50 Hz 20-80 M/min
65-265 F/min
Low 20-80,
HI 250-1000 M/min
Low 65-265,
HI 820-3280 F/min
…MAIN DRIVE MOTOR 1 HP ; 0.75 KW 2 HP ; 1.5 KW 2 HP ; 1.5 KW
…TABLE SIZE 500 x 500 mm
20 x 20 inch
550 x 600 mm
22 x 24 inch
600 x 560 mm

24 x 22 1/2 inch

…TABLE TILT R-15 , L-12
8 EACH F&B
R-15 , L-12
8 EACH F&B
15 EACH L& R
8 EACH F& B
…TABLE HEIGHT 990 mm ; 39 inch 1000 mm ; 39 3/8 inch 1000 mm ; 39 3/8 inch
…MAX. BLADE LENGTH 2900 mm ; 114 inch 3140 mm ; 123 1/2 inch 3975 mm ; 165 1/2 inch
…MAX. BLADE WIDTH 13 mm ; 1/2 inch 16 mm ; 5/8 inch 25 mm ; 1 inch
…WELDER CAPACITY 13 mm ; 1/2 inch 16 mm ; 5/8 inch 19 mm ; 3/4 inch
…MEASUREMENT 850 x 600 x 1740 mm
34 x 24 x 68 1/2 inch
940 x 675 x 1840 mm
37 x 26 1/2 x 72 1/2 inch
1075 x 765 x 2000 mm
42 x 30 x 79 inch
…NET WEIGHT 275 kgs 410 kgs 510 kgs
  • NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.
  • Reviews

    There are no reviews yet.

    Be the first to review “VERTICAL BAND SAW”

    Your email address will not be published. Required fields are marked *

    Back to Top