Compare

Features

  1. The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
  2. Exclusively for gears type cycling oil pump is furnished to cool off precise gears inside gear box, and minimize excessive wear on gears to lowest extent.
  3. Friction type disc clutch is adopted to absorb impact force caused by vertical movement of spindle, and effectively protect all transmission unit inside gear box. With the function of quick spindle return, this clutch will also help us to speed up our tapping operation.
  4. Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage. It will keep us from injurious dropping whenever the copper nut is excessively worn.
  5. Equipped with hydraulic STEP BY STEP clamping system, with proper selection on push button switch, column, arm, gear box can be clamped/released independently.

Specifications

MODEL

TC-1600H

Dai.of column

320

A

Distance from column surface to spindle center , Max

1600

D+C

Distance from column surface to spindle center , Min

350

C

Travel of spindle head

1250

D

Distance from base surface to spindle end , Max

1420

E

Distance from base surface to spindle end , Min

465

F

Elevating height of Arm

680

E-F-I

Effective area of box table

630x500x500

L×K×H

Dimension of base

2550x970x200

R×S×Q

Taper hole spindle

MT5

Stroke of spindle

270

I

R.P.M of spindle (rpm x steps)

56-1450×12

Feed of spindle (rev. x steps)

0.06 , 0.10 ,0.20×3

Main motor  (HP)

5 (two speed motor)

Elevating motor (HP)

2HP

Hydraulic clamping motor (HP)

1 HP

Coolant equipment (HP)

1/8 HP

Machine height from floor (Max.)

2790

M

Base + column height

2190

G

Net weight (approx)kgs

3300 (kg)

S Shipping weight (approx)kgs

3800 (kg)

Shipping dimensions (LxWxH)

2670×1120×2410

Capacity

Drilling

Stell

50Φ

Cast iron

60Φ

Tapping

Stell

40Φ

Cast iron

50Φ

  • NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.
  • Reviews

    There are no reviews yet.

    Be the first to review “TC – 1600”

    Your email address will not be published. Required fields are marked *

    Back to Top