Compare

Features

  1. The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
  2. Exclusively for gears type cycling oil pump is furnished to cool off precise gears inside gear box, and minimize excessive wear on gears to lowest extent.
  3. Friction type disc clutch is adopted to absorb impact force caused by vertical movement of spindle, and effectively protect all transmission unit inside gear box. With the function of quick spindle return, this clutch will also help us to speed up our tapping operation.
  4. Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage . It will keep us from injurious dropping whenever the copper nut is excessively worn.
  5. Equipped with hydraulic STEP BY STEP clamping system, with proper selection on push button switch, column, arm, gear box can be clamped/released independently.

Specifications

MODEL

TC-2150H

Dia of column

300

A

Distance from column surface to spindle center , Max

1275

D+C

Distance from column surface to spindle center , Min

305

C

Travel of spindle head

970

D

Distance from base surface to spindle end , Max

1330

E

Distance from base surface to spindle end , Min

438

F

Elevating height of Arm

625

E-F-I

Effective area of box table

635x520x420

L×K×H

Dimension of base

1830x785x185

R×S×Q

Taper hole spindle

MT5

Stroke of spindle

270

I

R.P.M of spindle (rpm x steps)

56-1450×12

Feed of spindle (rev. x steps)

0.06 , 0.10 ,0.20×3

Main motor  (HP)

5 (two speed motor)

Elevating motor (HP)

1HP

Hydraulic clamping motor (HP)

1HP

Coolant equipment (HP)

1/8 HP

Machine height from floor (Max.)

2795

M

Base + column height

2070

G

Net weight (approx)kgs

2300 (kg)

S Shipping weight (approx)kgs

2500 (kg)

Shipping dimensions (LxWxH)

2060×995×2240

Capacity

Drilling

Stell

50Φ

Cast iron

60Φ

Tapping

Stell

40Φ

Cast iron

50Φ

  • NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.

Reviews

There are no reviews yet.

Be the first to review “TC – 1250”

Your email address will not be published. Required fields are marked *

Back to Top